|
Hardware |
---|
Model A+ |
The RaspberryPi Model A+ is the low-cost variant of the RaspberryPi. It replaced the original Model A in November 2014. Compared to the Model A it has: • More GPIO. The GPIO header has grown to 40 pins, while retaining the same pinout for the first 26 pins as the Model A and B. • Micro SD. The old friction-fit SD card socket has been replaced with a much nicer push-push micro SD version. • Lower power consumption. By replacing linear regulators with switching ones we’ve reduced power consumption by between 0.5W and 1W. • Better audio. The audio circuit incorporates a dedicated low-noise power supply. • Smaller, neater form factor. The USB connector is now aligned with the board edge, moved composite video onto the 3.5mm jack, and added four squarely-placed mounting holes. Model A+ is approximately 2cm shorter than the Model A. The Model A+ is recommend for embedded projects and projects which require very low power, and which do not require Ethernet or multiple USB ports. |
About |
Contact |
Links |
Site Map |
© LampPi 2024 |